Filter
Top Products
94
7
Appendix
Troubleshooting
Problem Cause Remedy
The camera will
not turn on.
No batteries are
installed
Check whether battery is installed. If not,
install battery.
CF card cover is open Close the CF card cover.
Battery is installed
incorrectly
Check orientation of battery. Reinsert
battery according to the (-) and (+)
symbols in the battery compartment.
(p.12)
Battery is exhausted Install new batteries in the camera. Or,
use the AC Adapter.
No image on
the LCD
monitor
Connected to a TV The LCD monitor is always off when the
camera is connected to a TV. (The LCD
monitor is also off when the video cable I-
VC2 is connected to the camera.)
Image is displayed but
hard to see
Images on the LCD monitor may be hard
to see when taking pictures outside in
sunlight. Change the brightness settings
on your LCD monitor. (p.91) Or, use the
LCD monitor hood.(p.17)
Shutter release
button will not
work
Flash is charging While the flash status lamp is flashing
red, the flash is being charged and a
picture cannot be taken. The lamp lights
red when charging is complete.
The CF card is full Insert a CF card with some space, or
delete unwanted images. (p.15, p.78)
Recording Please wait until recording is finished.