Filter
Top Products
23
2
Quick Start
The shutter release button works in two steps.
• Press halfway
Lightly press (halfway) the shutter release button to lock the focus
position, exposure, and white balance.
• The shutter speed and aperture settings are only displayed when
pressing the shutter release button halfway.
• The following information is shown on the LCD monitor and flash
status lamp.
1. Focus frame
The frame lights green when focused. It is not displayed when out of
focus.
2. Flash lamp status
You cannot take a picture while the flash is charging.
• Press down fully
Press the shutter release button all the way down (fully) to take a
picture.
The Instant Review default setting is 0.5 sec.
• Pressing the
i button during Instant Review displays the Delete
menu.
• Select [Delete] and press the OK button to delete the image.
Pressing the Shutter Release Button
Flash status lamp (red)
Lit Flash is ready
Blink Charging
Instant Review
Setting the Instant Review Time 1 p.46