Filter
Top Products
59
Taking Pictures
4
7 Press the OK button.
The screen for taking the first image appears on the left side of the
LCD monitor.
8 Take the first image.
Position the subject at the center of the left side
of the screen, and press the shutter release
button. The image is displayed on the left side
of the LCD monitor. The right side of the screen
is for taking the second image.
9 Move the camera to the right without changing your
stance.
10 Overlap the images.
The first image appears opaque on the right of
the screen, overlapping the second. Match the
opaque image with the actual image to make
the layout match.
11 Press the shutter release button.
The second image is taken, and the display returns to step 7. To take
more 3D pictures, repeat the operations from step 8.
• Check the images in Playback mode.
• To cancel 3D Image mode, press the four-way controller (
3) to switch
to a different mode.
• Taking pictures of a moving subject will not provide a three-
dimensional effect, because two images are required for each
subject. If taking a picture of a person, ask your model to stay still,
and take the second picture quickly. Shifting the camera horizontally
is much easier when using a tripod or other support.
• The camera should be moved about 1/40 of the distance to the
subject. For example, if the distance is 3m, the movement amount
would be 3m÷40=7.5cm.Each individual sees 3D images differently,
so do not be too concerned. Use the chart below as a guide, and
experiment with different movement distances.
Distance to subject 0.1m 0.3m 0.5m 1m 3m 5m
Camera movement 0.5cm 1cm 1.5cm 2.5cm 7.5cm 13cm
55