Filter
Top Products
114
5
Playing Back and Deleting Images
Playing Back and Deleting Images
Playing Back Images
In this manual, the capture mode, such as for taking still pictures, is
referred to as [A mode]. The playback mode, such as for displaying
captured images on the LCD monitor, is referred to as [Q mode]. In Q
mode, you can perform simple editing operations on the images that are
played back.
Follow the procedure below to switch between A mode and Q mode.
1 Press the Q button.
The camera switches to Q mode.
1 Press the Q button or shutter release button halfway.
The camera switches to A mode.
Refer to “Playing Back Images” (p.42) for instructions.
To Switch Between A Mode and Q Mode
To Switch from A Mode to Q Mode
To Switch from Q Mode to A Mode
Displaying data in the built-in memory
When an SD memory card is set in the camera, images, movies, and
sounds in the SD memory card are displayed. If you want to display
images, movies, and sounds in the built-in memory, remove the SD
memory card.
[Viewing images in the built-in memory while the SD memory card is
inserted (built-in memory display)]
• When switching from capture mode to playback mode, you can display
images, movies, and sounds in the built-in memory while the SD memory
card is inserted by pressing the playback button for more than one second.
• In built-in memory display, you can play back still pictures (including enlarged
display) (p.42, p.117), movies (p.122), and sounds (p.156), and switch
between nine-image display, folder display, and calendar display (p.116).
• In built-in memory display, you cannot delete data, delete a selection, display
the Playback Mode Palette, or display the menu. If you want to perform any
of these operations on images, movies, or sounds in the built-in memory, do
so after removing the SD memory card.
Playing Back Still Pictures