Pentax Optio W20 Digital Camera User Manual


 
24
1
Getting Started
Image Storage Capacity, Movie Recording Time, Sound
Recording Time, and Playback Time
(at 23
°
C with the LCD monitor on and the battery fully charged)
*1: Recording capacity shows approximate number of shots recorded during
CIPA-compliant testing. (with LCD monitor on, flash used for 50% of the
shots, and 23 degrees centigrade) Actual performance may vary
according to operating conditions.
*2: According to the result of in-house testing.
Battery Level Indicator
You can check the battery level by the indicator on the LCD monitor.
This camera uses a rechargeable lithium-ion battery D-LI8. Use of
any other type of battery may damage the camera and cause
malfunction.
Insert the battery correctly. If the battery is incorrectly oriented,
malfunction may result.
Do not remove the battery while the camera is turned on.
If you do not intend to use the camera for a long time, remove the
battery.
The date and time may be returned to the default setting if the
camera is left without the battery for a long time.
Allow the camera to dry completely before changing the battery.
Avoid changing the battery where the camera is likely to get wet or
dirty, and make sure that your hands are dry.
Image Storage
Capacity
*1
(flash used for 50%
of shots)
Movie Recording
Time
*2
Sound Recording
Time
*2
Playback Time
*2
240 pictures 80 min. 400 min. 360 min.
In general, battery performance may temporarily deteriorate as
the temperature decreases.
Be sure to take a spare battery with you when traveling abroad or
to a cold region, or if you intend to take a lot of pictures.
Screen Display Battery Status
(green) Adequate power remains.
(green) Battery is running low.
(yellow) Battery is running very low.
(red) Battery is exhausted.
[Battery depleted] The camera will turn off after this message appears.