Pentax OptioV20 Digital Camera User Manual


 
3
If the generation of smoke or strange odor from the product or other
abnormality occurs, immediately discontinue using and consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electrical
shock.
If water should happen to get inside the product, consult a PENTAX
Service Center. Continuing to use the product can cause a fire or electrical
shock.
If thunder storm should be present during use of the battery charger or AC
adapter, unplug the power cord and discontinue use. Continuing to use the
product can cause damage to the equipment, fire or electrical shock.
Wipe off the plug of the power cord if it should become covered with dust.
This can cause a fire.
Caution
Do not place heavy objects on the AC plug cord, allow heavy objects to
drop onto it or allow the AC plug cord to become damaged due to
excessive bending. If the AC plug cord becomes damaged, consult a
PENTAX Service Center.
Do not short or touch the output terminals of the product while it is still
plugged in.
Do not plug in the AC plug cord with wet hands. This can cause an
electrical shock.
Do not subject the product to strong impacts or allow it to drop onto a hard
surface. This can cause a malfunction.
Do not use the battery charger to charge batteries other than rechargeable
lithium-ion battery D-LI78. This can cause overheating or malfunctions.
To reduce the risk of hazards, use only CSA/UL Certified power supply
cord set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper,
one end with a molded-on male attachment plug cap (with a specified
NEMA configuration), and the other is provided with a molded-on female
connector body (with a specified IEC nonindustrial type configuration) or
the equivalent.