Pentax OptioV20 Digital Camera User Manual


 
77
4
Taking Pictures
In this mode, pictures are taken continuously as long as the shutter
release button is pressed.
1 Press the four-way controller (2) in A mode.
2
Use the four-way controller (
45
)
to select
1
(Continuous Shooting)
and press the
4
button.
The camera is ready to take a series of pictures.
3 Press the shutter release button
halfway.
The focus frame on the display turns green if
the subject is in focus.
4 Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
Taking a Series of Pictures (Continuous Shooting Mode)
1
Continuous
Shooting
Each time a picture is taken, the image is saved in the memory
before the next image is taken. The higher the image quality,
the longer the interval between shots.
The flash does not discharge in Continuous Shooting.
1 (Continuous Shooting) can not be chosen in b (Auto Picture),
A (Night), C (Movie), O (Voice Recording), F (Digital
Panorama) or
S (Digital Wide) mode.
You can continue shooting until the memory capacity of the SD
Memory Card or built-in memory is full.
The interval of Continuous Shooting varies according to the
Recorded Pixels and Quality Level settings.
The focus, exposure and white balance are locked with the first image.
When the Face Recognition is activated (p.56), it works only when
taking the first image.
Shutter release
button
Four-way controller
4 button
Drive Mode
Drive Mode
Continuous Shooting
Continuous Shooting
Drive Mode
Continuous Shooting
OK
OK
OK
OK
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel
MENU
Cancel
Cancel
Cancel