Filter
Top Products
20
1
Getting Started
Installing the SD Memory Card
An SD Memory Card can be used with this camera. Captured images are
recorded on the SD Memory Card if a card is inserted ( appears on the
LCD monitor) or in the built-in memory if no card is inserted ( appears
on the LCD monitor).
1 Open the battery/card cover.
Slide the battery/card cover in the direction indicated by the arrow
and flip the cover open .
2 Insert an SD Memory Card so the label (the side with the
2 symbol) is facing toward the LCD monitor and push
the card in until it clicks.
3 Close the battery/card cover.
To remove the card, eject the card by pressing it in the direction
indicated by the arrow and pull it out.
Make sure that the camera is turned off before inserting or removing
the SD Memory Card.
The number of recordable images varies depending on the capacity
of the SD Memory Card or built-in memory and the selected image
size and quality. (1p.22)
Data Backup
Very occasionally, data stored in the built-in memory becomes unreadable. As a
backup measure, we recommend that you download important data to a PC or store
the data in a media other than the built-in memory.
3
2
1
To remove the
card, push in
and pull out
SD Memory Card
1
2
1
2
e_kb364.book Page 20 Monday, February 16, 2004 3:50 PM