Filter
Top Products
70
Taking Pictures
4
When the mode is set to
z
(Manual Focus), the central portion of the
picture is enlarged to full screen on the LCD monitor for focus
adjustment. Use the four-way controller (23) to adjust the focus while
watching the indicator on the LCD monitor.
After the focus is set, press any button except the four-way controller
(
23) or take your finger off the four-way controller (23). The screen
returns to the normal display about two seconds later.
In Autofocus mode, you can change the focusing point by moving the
focus frame.
1 In u (Focusing Area) mode, press the four-way
controller (2345).
Moves the focus frame [ ] (Focusing area).
2 Press the shutter release button halfway.
The focus frame is fixed in its new position.
To return the focus frame to its original location, press the qsz
button again.
If you take a picture while looking through the viewfinder when the
focus mode is set to Macro or Super Macro, the range of the
resulting picture will differ from what was seen in the viewfinder. Be
sure to check the image on the LCD monitor.
Manual Focus
For distant focus
For closer focus
When focusing, hold down the four-way controller (23) to focus
quickly.
Changing the Focusing Point
Troubleshooting “Subject is not in focus” 1p.131
2
12:00
12:00
2
12:00
3m
3m
1
0.3
0.3
.18
.18
3m
1
0.3
.18
04/14/2004
04/14/2004
04/14/2004
Indicator
e_kb364.book Page 70 Monday, February 16, 2004 3:50 PM