Filter
Top Products
55
Taking Pictures
4
You can take 3D pictures and view them by the parallel method or cross
method.
The default setting is [Parallel]. If you print out 3D pictures for viewing by
the parallel method and look at them through the optional 3D image
viewer, the image will appear in three dimensions.
You can also take 3D pictures for viewing by the cross method. Refer to
“Selecting the Viewing Mode” (p.56) for instructions on taking pictures by
the cross method.
1 Press the four-way controller (3) in Capture mode.
The Capture Mode screen appears.
2
Use the four-way controller (
2345
) to select
G
(3D
Image mode).
3 Press the OK button.
The screen for taking the first image appears on the left of the LCD
monitor.
4 Take the first image.
Hold the camera so that the subject is in the
middle of the left half of the screen and
press the shutter release button. The image
appears in the left half of the LCD monitor.
The right half of the screen is for taking the
second image.
5 Move the camera to the right
without changing your stance.
6 Take the second image.
Make sure that the subject is in the middle
of the right half of the screen and press the
shutter release button.
Taking 3D Pictures (3D Image Mode)
4, 5
3
1, 2
12
12
12:00
12:00
12
12:00
04/14/2004
04/14/2004
04/14/2004
12
12
12
e_kb364.book Page 55 Monday, February 16, 2004 3:50 PM