Pentax S4I Digital Camera User Manual


 
62
Taking Pictures
4
RBH<ISLNKJWKVWDEM
You can switch the Drive mode to Continuous Shooting mode. Pictures
are taken continuously while the shutter release button is pressed.
1 Press the four-way controller (2)
in Capture mode to display
j on
the LCD monitor.
2 Press the shutter release button
halfway.
The focus frame on the LCD monitor will
light green when the camera is in focus.
3 Press the shutter release button.
Pictures are taken continuously while the shutter release button is
pressed.
Shooting stops when you take your finger off the shutter release
button.
Continuous Shooting
(Continuous Shooting Mode)
You can continue shooting until the SD Memory Card is full.
The interval will vary according to the [Recorded Pixels] and
[Quality Level] settings.
The flash will not discharge in Continuous Shooting mode.
Continuous shooting is not available for Moving Picture,
Panorama Assist or 3D Image mode.
The focus, exposure and white balance are locked with the first
image.
2
1
12
12
12
12:00
12:00
12:00
04/14/2004
04/14/2004
04/14/2004
e_kb364.book Page 62 Monday, February 16, 2004 3:50 PM