Filter
Top Products
E-112
___indicates the factory setting.
Item
Display
mode
Description of settings
1394 CONTROL (Camera) Sets the control method for backup recording using a backup unit
connected to the 1394 terminal.
OFF:
The backup unit is not controlled.
EXT:
The backup unit can be controlled by the START/STOP button. The
images shot by the camera recorder are recorded by the backup unit.
Note that the camera recorder does not record them.
BOTH:
The images shot by the camera recorder are recorded by both the
camera recorder and backup unit.
CHAIN:
When the camera recorder’s media approaches its end during
shooting, the backup unit in the recording stand-by mode automatically
starts recording images.
1394 CMD SEL (Camera) Sets how the START/STOP button works for the backup unit.
REC_P:
This switches between recording and pause.
STOP:
This switches between recording and stop.
<Note>
If the backup unit does not have a rec pause function, select STOP.
PC MODE (Camera)
(MCR)
Selects the terminal for data transfer. (You cannot select USB and 1394
at the same time.)
USB DEVICE:
Mode for sending les using the USB connector.
1394 DEVICE:
Mode for sending les using the 1394 connector.
1394 HOST:
Mode for copying les from the P2 card onto an external hard disk drive
using the 1394 connector.
ACCESS LED (Camera)
(MCR)
Sets the access lamp to ON or OFF.
ON:
The lamp lights up and blinks as per the regular specications.
OFF:
The lamp is OFF in all circumstances.
REC LAMP (Camera) Sets lighting of the tally lamp.
OFF:
The tally lamp does not light.
FRONT:
Front tally lamp (microphone side) lights.
REAR:
Rear tally lamp (viewnder side) lights.
BOTH:
Both tally lamps light.
BEEP SOUND (Camera) Turns the beep sound ON or OFF.
ON, OFF
When ON is selected, the beep is sounded when the memory of the P2
card has been used up during recording.
When the beep is sounded, the audio signals from the output connector
are muted before the beep sound is output.
CLOCK SET (Camera)
(MCR)
Sets the camera-recorder’s calendar.
Setup menu list (continued)
OTHER FUNCTIONS screen (continued)