Filter
Top Products
ENGLISH
Preparation
E-21
Emphasizing outlines
Emphasizing the outlines of the images you see
in the viewnder or on the LCD makes it easier to
focus.
Emphasizing the outlines does not effect the
images you shoot.
1 In CAM mode, press EVF DTL.
“EVF DTL ON” appears on the screen for
about 2 seconds.
BARS
CH1 SELECT
RESET/TC SET
REC
CH2 SELECT
AUDIO
INT(L)
INPUT1
INPUT2
SHUTTER
SPEES SELECT
INT(R)
INPUT2
INPUT1
MIC POWER+48V
ON
OFF
INPUT2
ON
OFF
LCD
ZEBRA
EVF DTL
OIS
WFM
COUNTER
EVF DTL button
Press EVF DTL again to return to the original
display. “EVF DTL OFF” appears on the screen
for about 2 seconds.
Using the LCD
1 Set the POWER switch to ON.
2 Hold down the OPEN button to open the
LCD monitor.
It can open out to 120 degrees. Do not try
to open it further as this will damage the
camera.
OPEN button
3 Position the LCD monitor where it is
easiest to see.
The monitor can be rotated 180 degrees
toward the lens and 90 degrees toward you.
Do not apply unnecessary force to the
open LCD. This can damage the camera.
Ensure the LCD is fully closed.
•
•
•
•