Filter
Top Products
5.2.6. Camera Zoom
Here are two buttons to zoom in or zoom out on the image.
Note: camera zoom feature is reserved for future PTZ model.
5.2.7. Camera Pan/Tilt Control
Here are five buttons to move the camera to the up, down, left, right and home,
respectively
5.2.8. Camera Selector and Recording
Here are buttons to select cameras, and toggle buttons for recording.
5.2.9. Alert Message
Here is a combo box to show alert messages. Ex: free space is almost exhausted.
5.3. Application Configuration
Press the button shown below to configure the application program. After the button is
pressed, a dialog form will show up. Users then configure the program by the form as
the following sections.
5.3.1. Initial Setup Settings
Figure 5.3.1 shows settings for the global scope of the application including
initialization and environment. After all settings are complete, press the OK button to
save the configuration, and exit the form.
The following lists descriptions of each setting:
• Viewer Layout: Set the initial layout of cameras when starting CamView.
51