Filter
Top Products
• Blurred images may have been registered when registering or modifying the
preset button or home position button. Adjust the focus in manual focusing
again
• The image may be out of focus, if the object is too near, or depending on the
zoom position. Move the object off ICA-500, or adjust the zoom position.
• Some objects are difficult to focus on by the camera. When the objects are still
out of focus, adjust the focus using manual focusing, or change the objects
using Pan/Tilt operation.
Q: The color of the image is poor or strange
A:
• To insure the images you are viewing are the best they can be, set the Display
property setting (color quality) to 16bit at least and 24 bit or higher if possible
within your computer.
•The configuration on the ICA-500 image display is incorrect. You need to adjust
the image related parameters such as brightness, contrast, hue and saturation
properly.
Q: Image flickers
A: ‧ Wrong power line frequency makes images flicker. Make sure the NTSC or
PAL format of your ICA-500
.• If the object is dark, the image will flicker. Make the condition around the ICA-
500 brighter.
Q: Noisy images occurs
A: The video images might be noisy if the ICA-500 is located in a very low light
environment. Make the condition around the ICA-500 brighter.
Q: How to Reboot the ICA-500
A: If you just want to reboot system without change anything. Go to Network page
and click SAVE button directly, then system will reboot again.
Q: Can not play the recorded AVI file
A: Have installed Microsoft’s® DirectX 9.0 or later and use the Windows Media
Player 9 or later to play the AVI filed recorded by the ActiveX.
65