Filter
Top Products
5.7. Image Rotation
After the button is pressed, the display image rotates 180 degree. It is used for the
camera being installed upside-down direction.
Note video/images in recorded video will not be rotated.
Figure 5.7.
5.8. eMap
When you press the eMap button on the panel as shown in Figure 5.8, a form will
appear to show the eMap function.
Figure 5.8.
5.8.1. eMap Setting
Select the File from the menu bar and follow these steps to set up eMap :
1.New Layout: First, create a new layout.
2.Load Image: Choose an image file to load.
3.Save: Save all settings.
The following describes other menu options:
• Reset: Remove all camera icons in this layout.
• Delete: Delete the editing layout.
• Close: Exit eMap. Before you select it, we recommend you to save the current
settings.
As shown in Figure 5.8.1 and Figure 5.8.2, with the map image in layout, you can drag
the camera icons into proper positions to deploy your cameras.
The following describes layout entries:
• Name: Define a name for this layout.
• Position: Describe the layout position.
In the menu bar, select Layout to change editing layouts.
58