Polycom MP Digital Camera User Manual


 
Placing and Answering Calls
36
ViewStation User’s Guide
5. To end the regular telephone call, press the CALL•HANG-UP button on the
remote. Then highlight the Disconnect Speakerphone icon and press the
SELECT button on the remote. If you stay in this screen for 60 seconds, but
you do not press the SELECT button, both calls will be disconnected.
6. If the call was made with a number that is not in your address book, a dialog
box will give you the opportunity to add the number. If you select Yes, the
system will take you to the address book where you can enter the
information. If you select No, the main screen will appear on your monitor.
Answering a Video Call
There are two different modes of answering video calls: manual and
auto-answer. To answer a call manually, pick up the remote when the dialog box
appears. Then choose Yes to answer the call.
If the ViewStation is set to auto-answer, it will automatically answer all
incoming video calls. To change the mode to auto-answer, go to the System
Info
Setup
General Setup screen and set the Auto Answer Video Call field
to Yes. To disable it, set the field to No.