Filter
Top Products
System Information
93
ViewStation User’s Guide
LAN/SNMP
The LAN/SNMP screen contains information that is of interest to the system
administrator. This information enables the network to identify your
ViewStation.
LAN/Intranet
The LAN/Intranet screen is where you would change the DHCP setting for your
ViewStation. If it is connected to a LAN, then Client should be selected in the
DHCP field (if DHCP is available). If you are connecting the ViewStation
directly to a PC that isn’t on a network, then Server should be selected in the
DHCP field. See the
Connecting a PC
section of this manual for details.
CAUTION:
Do not select Server if your ViewStation is on a LAN with
other computers. If you do, the ViewStation will provide
IP addresses to the other computers even though the LAN
already has a DHCP server. Your IT personnel and
system administrators will have to repair any network
problems this causes.