Filter
Top Products
73
3
Shooting
A Set the mode dial to [ ] and press
the MENU button.
B Select [AUTO BRACKET].
C Select [ON] and then select [OK].
D Select [EXIT] to exit the menu display.
AB will be displayed on the LCD monitor.
E Press the shutter release button to
take the picture.
When the shutter release button is pressed,
three frames will be taken in succession at
–0.5 EV, 0 and +0.5 EV, based on the preset
exposure compensation value.
Auto bracket display
when the DISPLAY
button is pressed.
(Information display →
P.49)
Using Auto Bracket
This function takes three frames in succession: one each at –0.5 EV, 0 and
+0.5 EV, based on the exposure compensation value set in “Setting the
Exposure Compensation” (P.64). This function is useful for checking the
exposure compensation.
Mount the camera on a tripod or level surface to prevent camera shake.