Filter
Top Products
125
Various Shooting Functions
1
You can set the internal flash amount when the flash mode is set to
[Manual Flash] (GP.51). The flash amount can be set at [Full] or
[1/1.4], [1/2], [1/2.8], [1/4], [1/5.6], [1/8], [1/11], [1/16], [1/22], [1/32]
of the maximum amount.
1
Displaying the shooting menu.
• For the operating procedure, see P.103.
2
Press the " button to select [Man. Flash Amount] and
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button.
• The setting appears on the screen
when the flash mode is set to [Manual
Flash].
Note ----------------------------------------------------------------------------------------------
• The value set in [Man. Flash Amount] is available only when the flash mode is set to
[Manual Flash]. (GP.51)
• When the flash mode is set to [Manual Flash], the [Man. Flash Amount] setting will be
enabled, the [Flash Expo.Comp.] setting will no longer be enabled.
• The [Man. Flash Amount] setting and the actual flash amount may differ slightly in
some cases.
Caution------------------------------------------------------------------------------------------
The flash amount is not adjusted automatically when the flash mode is set to [Manual
Flash]. Do not fire the flash near eyes (especially of infants) or at people who are driving,
etc.
Setting the Flash Amount in Manual
Flash Mode (Man. Flash Amount)