Filter
Top Products
235
7
Appendices
7 Appendices
If an error message is displayed on the screen, take the
corresponding action.
Troubleshooting
Error Messages
Error Message Cause and Action Refer to
Insert Card No card is loaded. Insert a card. P.37
Set Date. The date is not set. Set the date. P.215
File Number Over Limit The file number limit has been exceeded. Use another card. P.213
P.214
Unmatched File The camera cannot display this file. Check the file contents on
your computer, and then delete the file.
-
Insufficient Memory.
Continue?
Because there is not sufficient capacity on the card, all the files
cannot be copied. Use another card.
P.34
Protected You are trying to delete a protected file. P.158
Card Is Write- Protected. The card is locked (write-protected). Unlock the card. P.35
Print settings cannot be set
for this file.
Print settings cannot be set for this file (movie, etc.). -
Insufficient Memory/
Capacity short
Files cannot be stored. Make sure there is enough free space or
delete unwanted files.
P.60
P.186
P.187
The image print number limit has been exceeded. Select an image
and set the number to 0.
P.181
Format internal memory You must format the internal memory. P.187
Format card The card is not formatted. Format the card with this camera. P.186
Card Error Reformat the card. If, after doing so, the error message still
appears, the card may be faulty. Do not use the card.
P.186
Writing Data Writing file to memory. Wait until writing finishes. -
No File There are no files that can be played back. -
Cannot Record The storage capacity is 0. Switch to another card or the internal
memory.
P.34