184
Changing Camera Settings
5
* The default setting varies depending on where you purchased the camera.
1
Press the MENU/OK button.
• The shooting menu (or the playback menu) appears.
2
Press the $ button.
• The setup menu appears.
• In scene mode, press the ! button
once or twice to select the [MODE]
tab, and then press the $ button
twice. The setup menu appears.
3
Press the !" buttons to select
the desired item.
• If the ADJ. lever or the DISP. button is
pressed at this point, the display
returns to the screen shown in Step 2.
• Press the " button at the bottom item
to display the next screen.
4
Press the $ button.
• The menu item settings are displayed.
5
Press the !" buttons to select
the setting.
Sequential No. [On], Off P.213
Date Settings P.215
Language/N
*
, English, Deutsch, Français, Italian,
Español,, , ,
P.216
Video Out Mode
*
NTSC, PAL P.217
Using the Setup Menu
In the instructions of this manual, the menu selection is confirmed when you “Press the
MENU/OK button” (as in Step 6 below), but you can also confirm the setting and return to the
menu screen by pressing the # button.
Setting Options [Default Settings] Refer to
The menu items are
provided on five screens.
