Filter
Top Products
If you are using the camera for the first time, read this section.
45
1
Press the POWER button to turn the
camera on, and turn the mode dial to
5.
2
Put the subject of your photo in the center of the
screen and press the shutter release button
halfway.
• The camera focuses on the
subject and the exposure and
white balance are fixed.
• If automatic focusing fails, a red
frame is displayed in the center
of the picture display and the
auto focus/flash lamp blinks
green.
• The focal distance is measured
at a maximum of nine points.
Green frames appear to indicate
the positions that are in focus.
Shooting
The shutter release button works in two steps. When you press
the shutter release button halfway (Half-press), the auto-focus
function is triggered to determine the focal distance. Next, press it
all the way down to shoot.
When your subject is not in the center of your composition,
compose your photo after focusing. (Focus Lock)
Frame
Auto Focus/Flash Lamp