Filter
Top Products
237
7
Appendices
Cannot charge the
rechargeable battery.
Rechargeable battery has
reached the end of its useful life.
Replace with a new rechargeable
battery.
P.37
Battery runs out quickly. It is being used at extreme high or
low temperatures.
--
Many shots are being taken in
dark places or other location
requiring extensive use of flash.
--
Shooting
Problem Cause Solution Refer to
The camera does not
shoot even if you press
the shutter release
button.
Battery is exhausted. When using the dedicated
rechargeable battery or AAA
nickel-metal hydride batteries,
charge the batteries as required.
When using AAA alkaline
batteries or AAA oxyride
batteries, replace them with new
batteries.
P.36
P.32
P.250
The camera is not on. Press the POWER button to turn
the camera on.
P.39
The camera is in playback mode. Press the 6 (Playback) button
to select the shooting mode.
P.55
The shutter release button is not
pressed all the way.
Press the shutter release button
all the way.
P.45
The SD memory card is not
formatted.
Format the card. P.186
The SD memory card is full. Load a new card, or delete
unwanted files.
P.60
P.37
The SD memory card has
reached the end of its useful life.
Load a new SD memory card. P.37
The flash is charging. Wait until the Auto Focus/Flash
lamp stops blinking.
P.51
The SD memory card is locked. Unlock the card. P.35
The contact surface of the SD
memory card is dirty.
Wipe with a soft, dry cloth. -
Unable to view the shot
image.
The image confirmation time is
too short.
Lengthen the image confirmation
time.
P.208
Images do not appear on
the picture display.
The camera is not on or the
picture display is dark.
Turn the camera on or adjust the
brightness of the picture display.
P.39
P.188
The picture display is off. Press the VF/LCD button to turn
the picture display on.
P.64
Display has been switched to the
LCD viewfinder.
Press the VF/LCD button to
switch to the picture display.
P.24
The VIDEO/AV cable is
connected.
Disconnect the VIDEO/AV cable. P.175
Nothing displays in the
LCD viewfinder.
The LCD viewfinder is not fully
attached.
Fully attach the LCD viewfinder. -
Problem Cause Solution Refer to