Filter
Top Products
137
Various Shooting Functions
1
You can prevent camera shake by turning on the camera shake
correction function.
At the time of purchase, the camera shake correction function is
turned on.
1
Displaying the shooting menu.
• For the operating procedure, see P.103.
2
Press the " button to select [Camera Shake Cor] and
press the $ button.
3
Press the !" buttons to select
[On].
4
Press the MENU/OK button.
• The symbol appears on the screen.
Caution------------------------------------------------------------------------------------------
• In multi-shot mode or manual exposure mode, when the shutter speed is set to 1 or
more seconds, the camera shake correction function cannot be used. When the
camera shake correction function is turned on in multi-shot mode or the shutter speed
is set to 1 or more seconds in manual exposure mode, E changes to F.
• The camera shake correction function does not work in movie mode. If you select 3
[Movie] in scene mode, the E display disappears.
• The camera shake correction function cannot prevent movement of the shooting
subject (caused by wind, etc.).
• Effects of the camera shake correction function vary depending on the surroundings.
Note ----------------------------------------------------------------------------------------------
The J symbol appears when camera shake is likely to occur. (GP.44)
Using the Camera Shake Correction
Function to Prevent Camera Shake
(Camera Shake Cor)