Filter
Top Products
106
To remove the lens hood
Loosen the lens hood by turning it in the
opposite direction of the arrow in the
illustration above.
• Remove the lens hood when you use the flash,
Nightshot or SuperNightshot, or its shadow will
appear in the picture.
Remote Commander
A PHOTO button (24)
The on-screen image when you press this
button will be recorded onto the “Memory
Stick Duo” as a still image.
B Memory control buttons (Index*, –/+,
Memory playback) (29)
C SEARCH M. button* (33)
D . > (Previous/Next) buttons*
(33)
E Video control buttons (Rewind,
Playback, Fast-forward, Pause, Stop,
Slow) (28)
F ZERO SET MEMORY button* (32)
G Transmitter
H START/STOP button (21, 23)
I Power zoom buttons (25, 30)
J DISPLAY button (18)
* These buttons are not available during Easy
Handycam operation.
b Notes
• Remove the insulation sheet before using the
Remote Commander.
• Aim the Remote Commander towards the
remote sensor to operate your camcorder
(p. 105).
To change the battery of the Remote
Commander
1 While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
2 Place a new battery with the + side facing
up.
3 Insert the battery case back into the Remote
Commander until it clicks.
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
b Notes
• When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may
not function properly. In this case, replace the
battery with a Sony CR2025 lithium battery.
Use of another battery may present a risk of fire
or explosion.
7
1
2
3
4
5
6
8
9
q;
Insulation sheet
Tab
Identifying parts and controls (Continued)