Filter
Top Products
85
Troubleshooting
You cannot dub correctly using the
A/V connecting cable.
• You cannot input externally from a device
connected with the A/V connecting cable.
• The A/V connecting cable is not connected
properly.
Make sure that the A/V connecting cable is
connected to the input jack of the other
device for dubbing a picture from your
camcorder.
When connected using an i.LINK
cable, no picture appears on the
monitor screen or the picture is
distorted during dubbing.
• Set [VCR HDV/DV] on the
(STANDARD SET) menu according to the
requirements of the connected device
(p. 56).
• If the device to be connected is not
compatible with HDV1080i specification,
you cannot dub in HD (high definition)
image quality (p. 64). For details, refer to
the instruction manuals supplied with the
device to be connected.
• Down convert the pictures recorded in
HDV format to DV format and dub in SD
(standard definition) image quality (p. 64).
You cannot add sound to the
recorded tape.
• You cannot add sound to the recorded tape
on this unit.
You cannot dub correctly using the
HDMI cable.
• You cannot dub pictures using the HDMI
cable.
New sound added to a recorded tape
on another camcorder is not heard.
• Adjust [ AUDIO MIX] from the [ST1]
(original sound) side until the sound is
heard appropriately (p. 57).
Still pictures cannot be dubbed from
a tape to a “Memory Stick Duo.”
• You cannot record or a distorted picture
may be recorded if the tape has been used
repeatedly for recording.
The computer does not recognize
your camcorder.
• Install “Picture Motion Browser” (p. 73).
• Disconnect USB devices other than the
keyboard, the mouse, and the camcorder
from the (USB) jack on the computer.
• Disconnect the cable from the computer
and camcorder, restart the computer, then
connect them again correctly.
You cannot install the supplied
software, “Picture Motion Browser,”
on a Macintosh computer.
• You cannot use “Picture Motion Browser”
on a Macintosh computer.
Depending on the functions, you may not be
able to use them together. The following list
shows examples of menu items and functions
that cannot be used at the same time.
Connecting to a computer
Functions that cannot be used
together
Not available If this function is set
backlight function [FIREWORKS],
[SPOT METER],
[MANUAL] of
[EXPOSURE]
[SCENE SELECT] NightShot, [TELE
MACRO],
[SUPER NS],
[CINEMA EFECT],
[OLD MOVIE],
[COLOR SLOW S]
Continued ,