Filter
Top Products
145
Adjusting the image during recording
Symptom Explanation/Solution
Focus does not adjust
automatically.
Set “Focus” to “Auto.”
page 70
The recording conditions are not suitable for auto focus. Adjust the
focus manually.
page 70
The lens is dusty on the surface. Clear the lens and check the
focus.
Recording is being made in a dark location.
Use a light to brighten the area.
•
•
•
•
The image appears too bright,
flickers, or changes color.
This may occur when you make a recording under a fluorescent
sodium, or mercury lamp.
Cancel “iSCENE” to avoid or minimize this phenomenon.
page 61
•
Image’s color balance is not natural.
White balance adjustment is required. Adjust to the proper “White
Balance.”
page 64
•
A subject passing quickly through
the frame appears distorted
This is called the focal plane phenomenon. This is not a
malfunction. Because of the way the image device (CMOS sensor)
reads out video signals, a subject passing through a frame rapidly
may appear to bend, depending on the recording conditions.
•
Playback on your camcorder
Symptom Explanation/Solution
Playback (play/pause) function does
not work.
Image files recorded using another device may not play on your
camcorder.
Check memory card compatibility.
page 33
•
•
Photo images stored on a storage
media are not displayed in the
actual size.
Photo images recorded on other devices may not appear in their
actual size. This is not an error.
•
Playback is interrupted
unexpectedly.
Check if the AC power adaptor or battery back is properly
connected and secure.
•