Filter
Top Products
Introduction
14_ Introduction
ADJUST THe pANNING, TIlTING & ROTATION WHIle WATCHING THe mONITOR
You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism.
Pan Base moves by 176˚ to each side direction and 352˚ on the whole.
Tilt Base covers total 73˚ angle(0˚ ~ 73˚).
Rotate Base moves by 174° to each side direction and 348° on the whole.
Methods of adjustment
The case of wall installation
1
After mounting the camera on a wall, adjust the panning angle so that the
correct viewing angle is attained and the titling is correctly orientated.
2
And then adjust the tilting angle by rotating the tilt base.
3
Loosen the rotate base hold screw and adjust rotate base for the best view
4
Tighten rotate base securing screw.
The case of ceiling installation
1
After mounting the camera on a ceiling, adjusting the panning angle to the
correct viewing position by rotating the pan base.
2
And then adjust the tilting angle by rotating the tilt base.
3
Loosen the rotate base hold screw and adjust rotate base for the best view
4
Tighten pan and tilt securing screw.
When you want to adjust the Pan/Tilt/Rotate Base, loosen, adjust and then tighten the Pan/Tilt/
Rotate Base screws.
1.
2.
176˚
Pan Base
174˚
Rotate Base
Tilt Base
73˚
M