Filter
Top Products
22_ Setup
Setup
2. Select a desired mode using the Left and Right buttons according to the picture display
DAY/ NIGHT
Y
ou can display pictures in color or black and white.
1.
When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up
and Down buttons so that the arrow indicates ‘DAY/NIGHT’.
you want.
AUTO
:
The mode is switched to ’Color‘ in a normal environment, but switches to
’B/W‘ mode when ambient illumination is low. To set up the switching time
for AUTO mode, press the Function Setup
switch
. You can turn on or off
the burst signal on B/W mode.
COlOR : The picture is always displayed in color.
b/W
When AGC in the EXPOSURE menu is 'OFF', AUTO mode is not available to select.
exTeRN
AUTO SETUP
▶1.BURST MODE ON
2.COLORB/W
DURATION FAST
DWELL TIME 5 SEC
3.B/WCOLOR
DURATION FAST
DWELL TIME 10 SEC
4.RETURN
BURST MODE :
DURATION :
-
-
DWELL TIME :
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
-
: Ground to the grounding terminal to allow automatic switching between COLOR
and B/W(Black/White).
You can turn on or off the
burst signal on B/W mode.
You can select the brightness
to night mode.
level at which the camera switches from day
You can select the duration
time about changing the day/night mode.
BW MODE SETUP
䯝
1.BURST MODE ON
2.IR MODE
3.RETURN
BURST MODE :
-
You can turn on or off
the burst signal on B/W mode.
: The picture is always displayed in black
and white.
IR MODE (HIGH/ LOW/ USER) :
-
When IR LED is turned on in
B/W, the
objects can be clearly identified
due to the
function that decreases screen
saturation
of objects within a short distance.
TOP/BOTTOM/LEFT/RIGHT :
•
range according to the location of objects.
IR MODE SETUP
䯝
IR MODE
1. HIGH
Press SET to Return
After selecting USER, you can adjust the