Filter
Top Products
26_ Setup
Setup
COaX : COAX option is set to "On" will specify the use of coaxial communication.
SSDR(Samsung Super Dynamic Range)
1.
SSDR SETUP
▶ LEVEL
IIIIIIIIII
*
IIIIIIIIIII
8
Press SET to Return
SSDR illuminates darker areas of an image while
:
retaining the same light level for brighter areas to
even out the overall brightness of images with
high contrast between bright and dark areas.
When the SETUP menu screen is displayed, select ‘SSDR’ by using the
Function Setup switch so that the arrow indicates ‘SSDR’.
2. Use the Function Setup switch to change the SSDR level in the sub menu according to
the contrast between bright and dark areas.
SYNC
▶ PHASE
*
IIIIIIIIIIIIIIIIIIIII
0
Press SET to Return
syNC : In ar
eas where the supply is at
60Hz(NTSC), 50Hz(PAL), you can
synchronize the output phase of multiple
cameras using the power synchronization
function (Line-Lock) without using a
synchronization signal generator.
INT : Internal Synchronization Type
L/L : Power Synchronization Type, Line-lock
Press the Function Setup switch.
You can select a desired phase from 0 to 359 when select ‘phase’.
-
-
When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the LL type
synchronization.
When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
SSDR OFF
SSDR ON