Filter
Top Products
English _19
● INSTALLATION & CONNECTION
CONNECTING WITH OTHER DEVICE
Ethernet Connection
Connect the Ethernet cable to the local network or to the Internet.
Power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
J
Be careful not to reverse the polarity when you connect the power cable.
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
If both PoE and DC 12V are supplied, the product will operate with the first-applied power source.
Please make sure the monitor and camera are turned off when connecting them.
AUDIO OUT
VIDEO
SD SYSTEMPOWER
RESET
NETWORK
ACT
LINK
GND
AC 24V
DC 12V
AUDIO IN
SD CARDSD CARD
SD CARD
+
1 : ALARM IN 4 : GND
2 : ALARM OUT 5 : RS-485+
3 : ALARM COM 6 : RS-485-
1 2 3 4
5 6
Monitor
(for installation)
Ethernet
Power