Filter
Top Products
English _55
● SETUP SCREEN
4. When done, click [Apply ( )].
M
All these operations above mentioned will be enabled only if the network camera is properly
connected to the pan/tilt-compliant receiver. And the serial port for the pan/tilt operations should
be properly specified.
J
The baud rate may not be controlled depending on the product specifications.
5. Click [Direction Adjustment (
)].
• [Change direction to (
)/( )/( )/( )] : Change the direction of camera
lens.
• [Moving speed control ( )] :
The bigger the number is, the faster the
moving speed becomes.
6. Set the zoom and focus control
buttons.
• [Zoom In ( )] : Zooms in the
screen.
• [Zoom Out ( )] : Zooms out the
screen.
• [Adjust Focus ( / )] : Adjusts
the focus in the screen.
• [Zoom Speed Control (
)]
: The bigger the number is, the faster
the zoom speed becomes.
7. Set the preset.
M
The pan/tilt/zoom operations can be controlled only if the camera is connected to a pan/tilt
receiver with a proper <Serial Setup>.
To add a preset
1) Select the preset number to add.
2) Set the name for the preset.
3) Press the [
] button.
To delete a preset
1) Select the preset number to delete.
2) Press the [ ] button.
To move a preset
1) Select a preset number that you want to move.
2) Press the [ ] button.