Filter
Top Products
setup screen
54_ setup screen
OSD Setup
1. Select <OSD>.
2. Select each item and set it properly.
• Camera title :
Specify the camera title
that will be displayed on the screen.
You can enter up to 15 characters for the
title.
• Camera title position x, y : Specify the coordinates where the camera title is
displayed.
Time OSD Setup
1. Select <Time OSD>.
2. Select each item and set it properly.
• Time display :
Specify the use of time
display on the screen.
• Date format : Specify the date format
that will be displayed on the screen.
• Time position display X, Y : Specify the position of time.
• Display weekday : Specify whether displays the day of the week on the screen.
External PTZ setup
Configure the connection settings to the external pan/tilt receiver so that you can control
the PTZ operations via the receiver connected to the RS-485 port of the camera.
1. Select the <Audio & Video (
)> tab
from Setup menu.
2. Click <External PTZ setup>.
3. Specify the serial port.
You can set the RS-485 communication
mode for pan/tilt-compliant receiver that
is connected to the network camera.
• Protocol : From SAMSUNG-T/
SAMSUNG-E / PELCO-D/PELCO-P
/ SUNGJIN, select the same protocol
as that of the receiver.
• Camera ID : Provide a camera ID.
• Baud rate : Transfer rate for RS-485
communications
• Data : Specify the data bit.
• Parity : Specify the parity bit.
• Stop bit : Specify the stop bit.