Filter
Top Products
setup screen
66_ setup screen
Alarm input
You can set the alarm input type, activation time, and operation mode.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <Alarm input>.
3. Specify an input device.
• Type
- Normal Open : It is normally open,
but if it is closed, an alarm will be
triggered.
- Normal Close : It is normally
closed, but if it is open, an alarm
will be triggered.
4. Specify the <Activation time>.
• Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
If set to Always, the activation time cannot be changed.
• Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
• [
] : Reset all settings.
5. Specify an operation that will perform if an alarm occurs.
• Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
• FTP sending : Specify the use of FTP transfer in the alarm input setup.
• E-mail sending : Specify the use of email transfer in the alarm input setup.
• Record : Specify the use of recording in the alarm input setup.
• Goto Preset : Specify the use of it if the camera moves to a preset position upon
an alarm input
Only if the camera pan/tilt receiver is installed, GoTo Preset is available.
6. When done, click [Apply ( )].