Samsung VP-DX105(i) Camcorder User Manual


 
使用
VOICE PLUS
Voice Plus 功能僅在 DVD 攝錄放影機播放模式下
操作。
第 38 頁
此功能使您能夠通過 DVD 攝錄放影機的麥克風對
預先錄製好的光碟進行解說。
如果您想將 DVD 複製到其他 AV 裝置(DVD 錄製
機、VCR)上,則可使用來自 DVD 攝錄放影機的內
建麥克風的傳入語音為 AV 裝置配音,而不是複製
預先複製在光碟上的音訊信號。
1.
使用 AV 纜線將 DVD 攝錄放影機連接至 AV 裝置。
第 86 頁
2.
儲存模式
開關設定為
DISC
(僅適用於
VP-DX103(i)/DX104/DX105(i))
第 30 頁
3
.
將想要播放的光碟插入此 DVD 攝錄放影機中。
4.
按下
MODE
按鈕以設定播放模式。
5.
使用
搖桿
選擇所需的影像。
6.
在播放時,您可以在想要的位置按下
錄製開始 / 停止
按鈕。
Voice Plus
圖示 ( ) 會出現,同時「
Voice +
會閃爍一小會。
將用內建麥克風傳入的語音為所連接的 AV 裝置配
音,而不是複製光碟上預先錄製好的聲音。
7.
若要取消,可再次按下
錄製開始 / 停止
按鈕。
Voice Plus
僅當連接了 AV 纜線後才可用。如果連接 USB 纜線,
Voice Plus
功能就可能無法正確操作。( 僅限
VP-DX103(i)
/DX104/DX105(i)
)
當正在執行 Voice Plus 功能時如果您執行停止、播放 /暫停、
倒帶或快進功能,則會取消激活 Voice Plus 功能。
當正在執行 Voice Plus 功能時,
MENU
按鈕或
PHOTO
按鈕
無法操作。
Voie Plus
功能不會影響錄製的光碟上的原始音效。
使用
Voice Plus
功能時,音效將從 DVD 攝錄放影機上的內部麥
克風傳輸到連接的 AV 裝置。確定沒有以任何方式遮住或堵塞麥
克風。
調整連接外部裝置上的音量。( 電視、音響系統等)
如果將 DVD 攝錄放影機放在靠近外接裝置的揚聲器,則可能會
產生回聲。
調低外接裝置的音量,並使 DVD 攝錄放影機與其保持適當的距
離。
在連接到外部裝置之前,確定將「
AV In/Out
」設定為「
Out
。( 僅
適用於
VP-DX100 i /DX103 i /DX105 i
)
第 81 頁
89_ English
臺灣
_89
USING THE VOICE PLUS
The Voice Plus function works only in the DVD
camcorder play mode.
page 38
This function enables you to narrate over a
pre-recorded disc via the DVD camcorder’s
microphone.
When you want to copy a DVD onto other AV
devices (DVD recorder, VCR), you can dub
your voice sound incoming from the internal
microphone of your DVD camcorder to an AV
device, instead of copying the audio signals on
a pre-recorded disc.
1. Connect the DVD camcorder to your AV device
with AV cable.
page 86
2. Set the Storage mode switch to DISC. (VP-
DX103(i)/DX104/DX105(i) only)
page 30
3. Insert the disc you wish to play back in this DVD
camcorder.
4. Press the MODE button to set the Play mode.
5. Use the Joystick to select the desired image.
6. Press the Recording start/stop button on a point
where you want during the playback.
Voice Plus icon (
) is displayed and “Voice +” will
blink for a while.
Sound signals incoming from the internal
microphone will be dubbed to a connected AV
device, instead of copying the pre-recorded sound on a disc.
7. To cancel, press the Recording start/stop button again.
Voice Plus is available only when the AV cable is connected.
If a USB cable is connected, the Voice Plus function may not
operate properly. (VP-DX103(i)/DX104/DX105(i) only)
If you perform Stop, Play/Pause, REW, or FF while the Voice
Plus function is being executed, the Voice Plus function will be
deactivated.
When the Voice Plus function is in progress, the
MENU button
or PHOTO button does not work.
The Voice Plus function does not affect the original sound on
the recorded disc.
Sound is transferred from the internal microphone on this DVD
camcorder to the connected AV device, when using the Voice
Plus function. Make sure the microphone is not covered or
blocked in any way.
Adjust the sound volume on the connected external device. (TV,
audio system etc.)
Feedback may occur if the DVD camcorder is placed near the
speaker of an external device.
Turn down the volume of the external device and keep the DVD
camcorder a reasonable distance away.
Make sure to set “AV In/Out
” to “Out” before connecting to an
external device. (VP-DX100 i /DX103 i /DX105 i only)
page 81
0:00:59
012
Voice +
Voice Plus 功能僅在 DVD 攝錄放影機播放模式下
此功能使您能夠通過 DVD 攝錄放影機的麥克風對
如果您想將 DVD 複製到其他 AV 裝置(DVD 錄製
1.
2.
3

TV
Signal fl ow
AV cable
DVD camcorder
Eng+Tai_VP.indb 89 2008-03-07 ¿ÀÈÄ 6:27:38