Filter
Top Products
PRECAUTIONS
In case of problems
Do not use the camera if smoke or a strange odor
comes from the unit, or if it seems not to function
correctly. Disconnect the power cord immediately,
and consult your dealer (or a Sanyo Authorized
Service Centre).
Do not open or modify
Do not open the cabinet, as it may be dangerous
and cause damage to the unit. For internal settings
and repairs, consult your dealer (or a Sanyo
Authorized Service Centre).
Do not put objects inside the unit
Make sure that no metal objects or flammable
substance get inside the camera. If used with a
foreign object inside, it could cause a fire,
short-circuits or damages.
If water or other liquid gets inside the camera,
disconnect the power cord immediately, and
consult your dealer (or a Sanyo Authorized Service
Centre). Be careful to protect the camera from rain,
seawater, etc.
Be careful when handling the unit
To prevent damage, do not drop the camera or
subject it to strong shock or vibration.
Install away from electric or magnetic fields
If installed close to a TV, radio transmitter, magnet,
electric motor, transformer, or audio speakers, the
magnetic field they generate may distort the image.
Protect from humidity and dust
To prevent damage to the camera, do not install it
where there is greasy smoke or steam, where the
dampness may get too high, or where there is a lot
of dust.
Protect from high temperatures
Do not install close to stoves or other heat
generating devices, such as spotlights, or where the
camera could be subject to direct sunlight, as that
could cause deformation, discoloration or other
damage.
Be careful when installing close to the ceiling in a
kitchen or boiler room, as the temperature may rise
to high levels.
Install where the temperature range will stay
between 5˚C and 40˚C. (no condensation)
Cleaning
•
Dirt can be removed from the cabinet by wiping
it with a soft cloth. To remove stains, wipe with
a soft cloth moistened with a neutral detergent
solution and wrung dry, then wipe dry with a
dry soft cloth.
•
Do not use solvents, thinner or other chemical
product on the cabinet, as that may cause
deformation and paint peeling. Before using a
chemical cloth, make sure to read all
accompanying instructions. Make sure that no
plastic or rubber material comes in contact with
the cabinet for a long period of time, as that
may cause damage or paint peeling.
IMPORTANT NOTE:
The EPA certified RBRC
®
Battery Recycling Seal on the
nickel-cadmium (Ni-Cd) battery
indicates SANYO is voluntarily
participating in an industry
program to collect and recycle
these batteries at the end of
their useful life, when taken
out of service in the United
States or Canada. The RBRC
program provides a convenient
alternative to placing used
Ni-Cd batteries into the trash
or the municipal waste stream,
which may be illegal in your
area. Please call
1-800-822-8837 for
information on Ni-Cd battery
recycling and disposal
bans/restrictions in your area.
SANYO’s involvement in this
program is part of our
commitment to preserving our
environment and conserving
our natural resources.
L42A4/US (DSR-C100) GB 2001, 4, 16
4 English