Filter
Top Products
145 English
INITIALIZING THE CARD MEMORY AND
INTERNAL MEMORY
5 Select “YES”.
6 Press the SET button.
h Formatting begins.
h During formatting, “Formatting” and “do not power off” are shown on
the monitor.
h The three BGM audio files that were stored in your camera’s internal
memory at the time of purchase can be recovered by formatting the
internal memory.
CAUTION
Caution during reformatting
iPlease do not turn off the camera or insert/remove the card while the card
is being formatted.
Reformatting erases the data
iWhen the card or internal memory is initialized, all the recorded data is
erased. Protected data is also erased, so before reformatting or internal
memory, any data you want to keep should be copied to your personal
computer’s hard disk or other storage medium.
Caution regarding disposing/transferring the card (recovering data from
a reformatted card)
iIf a card is reformatted or the data is erased from the card using the
camera or a computer, the card’s control data may be merely modified and
the data itself may not be completely erased from the card.
iIn some cases it may be possible to recover the data from a reformatted
card using special software for that purpose. However, if the camera is
used to execute a full format, it will be impossible to recover the data even
by the use of data recovery software.
iIf you are disposing of a card, it is recommended that you physically
destroy it. If you are transferring the card to someone else to use, it is
recommended that you use the camera’s full format function to reformat
the card, or use commercially available software for erasing card data.
Managing data is the responsibility of the user.
HINT
To cancel reformatting
iIn step 5, select “NO”, and press the SET button.