Filter
Top Products
English 22
HINT
Recharging when connected to the USB terminal (page 9 in the SANYO
Software Pack INSTRUCTION MANUAL)
iThe battery can be recharged while the camera is connected to a
computer.
iNote, however, that the time it takes to recharge will differ depending on
the camera’s operating condition.
iConnect the dedicated USB interface cable to the USB connector on your
computer. Do not connect it to the USB connector on the monitor or the
keyboard, or to the USB hub.
iWhen the surrounding temperature is high, depending on the camera’s
operating condition and the battery pack temperature, in some cases the
multi-indicator may slowly flash red and the battery pack cannot be
charged.
iIf the camera is not going to be used for an extended period of time, please
disconnect the dedicated USB interface cable from the camera.