Sealife DC200 Digital Camera User Manual


 
18
How to adjust the White Balance
To adjust the White Balance, perform the following:
1. Set the operating mode to RECORD.
2. Press the Menu button. The Record menu appears.
3. Select the WHITE BALANCE item using the arrow button (/), then press OK button.
4. Select the desired white balance setting. Using the arrow button (/), then press OK button.
For information on white balance, see page 21.
This setting is reset to AUTO when the camera power is off.
How to set the OSD (On-Screen Display) language
To set the OSD language, perform the following:
1. Set the operating mode dial to LAND & SEA.
2. The Setup menu appears.
3. Select the LANGUAGE item. Using the arrow button (/), then press OK button.
4. Select the desired language setting.
For information on OSD language, see page 26.
The setting is conserved even if the camera power is off.
PIONEERmanREV 11/19/01 6:00 PM Page 18