Sealife DC200 Digital Camera User Manual


 
OK Button
The OK button is active any time a menu or dialog is displayed. Use the button to select/confirm the
currently highlighted item.
Power Button
Press the power button to turn the camera on or off. While the camera is powered on and there is no
button activity or host communication for about 3 minutes, the camera will automatically switch to the
POWER SAVE mode (standby) to conserve power. Press any button or rotate the Mode dial will bring
the camera back from POWER SAVE mode. If there is no activity for 5 minutes, the system power will
turn off and you will have to press the power button to turn the camera back on. When the camera is
set to SEA or EXT. FLASH mode, the system will turn off in 15 minutes.
Shutter Button (Big red button)
The Shutter button is only active in RECORD and PLAY mode. You may press the button in RECORD
mode for image capturing, processing and storing. Before taking pictures, please make sure that your
camera has available free space for image storage and there is appropriate light for a successful image
capturing. In PLAY mode, the shutter toggles between the DPOF printer setting.
Self-Timer Button
The Self-Timer button is active only in RECORD mode. When the Self-Timer button is pressed, the 10-
second self-timer is enabled. A red light on front of camera will illuminate. To disable the self-timer
function, do any of the following:
• Press the Self-Timer button again.
• Press the Shutter button to capture the image.
• Power off the camera.
• Change to another mode other than RECORD mode.
• Let the camera automatically disable the Self-Timer function after an image is captured.
35
PIONEERmanREV 11/19/01 6:00 PM Page 35