Sealife DC200 Digital Camera User Manual


 
54
Battery Life
We have tested the following batteries under normal and extreme operating conditions. The following operating
times are averages and can vary depending on age of battery, temperature and other factors.
Normal conditions (designed to simulate operating conditions when scuba diving):
1. Turn camera on, take a test picture. Set to Sea Mode. Put in housing, close housing.
2. 90 minutes later: Turn power on. Take three pictures on land. 10 Minutes later: Take pictures underwater for 45
Minutes, not continuously, but every 2 Minutes, =23 pictures.
3. Wait for 1 hour, then take 20 underwater pictures in 40 Minutes.
4. Wait for 2 hours, then repeat step 2 and step 3.
5. Then repeat 3.
Extreme conditions (designed to test the power consumption in the most extreme operating conditions.)
1. Turn camera on, Set to External FLASH mode. Put in housing, close housing.
2. Take picture intervals as quickly as possible (display always ON, FLASH always fires)
Battery Life during Life during
Type NORMAL dive use EXTREME usage
SeaLife Ni-MH rechargeable (1600 mAh) 243 minutes 100 minutes
Energizer Lithium 1 (non-rechargeable) 400 minutes 130 minutes
Duracell Ultra (high-energy alkaline) 205 minutes 26 minutes
Duracell Coppertop (Standard alkaline) 20 minutes 10 minutes
Note: The above times may vary depending on other factors like temperature, humidity, age of batteries and other factors.
PIONEERmanREV 11/19/01 6:00 PM Page 54