Sony 3-280-847-11(1) Camcorder User Manual


 
103
Troubleshooting
The picture in the viewfinder is not clear.
Move the viewfinder lens adjustment lever until the picture appears clearly (p. 18).
The picture in the viewfinder has disappeared.
If you change [VF POWERMODE] to [AUTO], the finder light remains off while the LCD
panel is open (p. 81).
The supplied Remote Commander does not function.
Set [REMOTE CTRL] to [ON] (p. 92).
Remove any obstructions between the Remote Commander and the remote sensor.
Keep strong light sources, such as sunlight or overhead lighting, away from the remote
sensor, otherwise the Remote Commander may not function properly.
Insert a fresh battery in the compartment with its +/– terminals matching those of the
compartment (p.135).
Another VCR malfunctions when you use the supplied Remote Commander.
Select a commander mode other than VTR 2 for your VCR.
Cover the sensor of your VCR with black paper.
The cassette cannot be ejected from the compartment.
Make sure the power source (battery pack or AC Adaptor/Charger) is connected correctly
(p. 14).
Moisture condensation has occurred inside the camcorder (p. 122).
The Cassette Memory indicator or title display does not appear while using a
cassette with Cassette Memory.
This camcorder does not support Cassette Memory, so the indicator does not appear.
The remaining tape indicator is not displayed.
Set [ REMAINING] to [ON] to always display the remaining tape indicator (p. 81).
The cassette is noisier during rewinding or fast-forwarding.
When using the DK-415 cable rewind/fast forward speed increases (compared with battery
operation) and therefore increases noise. This is not a malfunction.
You cannot delete pictures or format the “Memory Stick Duo.”
The pictures are protected. Release the protect function on your computer, etc.
Cassette tapes/“Memory Stick Duo”
Continued ,