Filter
Top Products
91
Using the Menu
1 Select [COPY] with the SEL/PUSH
EXEC dial.
2 Select the camera profile that you want
to copy with the SEL/PUSH EXEC dial.
3 Select [MEMORY STICK] or
[CAMERA] for a “Memory Stick Duo”
or your camcorder as a copy destination
of the camera profile.
4 Select [NEW FILE] or an existing
profile name with the SEL/PUSH
EXEC dial.
5 Select [YES] on the check screen.
z Tips
• You can copy a camera profile saved on a
“Memory Stick Duo” to your camcorder.
See page 43.
See page 20.
When you use your camcorder abroad, you
can adjust the clock to the local time by
setting the time difference with the SEL/
PUSH EXEC dial.
When you set the time difference to 0, the
clock returns to the original setting.
You can select the language to be used on
the LCD screen.
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) in case that you cannot find
your native tongue among the options.
When you set this function to [ON], you
can enlarge movie images about 1.1 to 5
times (still images about 1.5 to 5 times)
with the handle zoom lever. The default
setting is [OFF]. To end the zoom, press
and hold the W side of the handle zoom
lever until it stops.
z Tips
• To move the zoom horizontally, press the SEL/
PUSH EXEC dial, then turn the dial. To move
the zoom vertically, press the SEL/PUSH EXEC
dial one more time, then turn the dial.
You can slightly reduce the recording start
point time when resuming recording by
changing the POWER switch from OFF to
CAMERA.
BOFF
It takes some time to restart recording from
the state that the drum has stopped
rotating, but the transition from the last
recorded scene is smooth.
ON ( )
The time shortens slightly until recording
restarts from the state that the drum has
stopped rotating, but the transition from
the last recorded scene may not be smooth.
Select this when you do not want to miss a
recording chance.
z Tips
• When this function is set to [ON], the interval
between scenes freezes for a moment (editing on
your computer is recommended).
• When the camcorder is left in standby for more
than about 3 minutes, your camcorder exits from
standby (the drum stops rotating) to prevent tape
wear and battery loss. Since the power does not
turn off, you can restart recording by pressing
the REC START/STOP button again.
ASSIGN BTN
CLOCK SET
WORLD TIME
LANGUAGE
PB ZOOM (Playback zoom)
QUICK REC
Continued ,