Sony 3-280-847-11(1) Camcorder User Manual


 
98
3 Connect your VCR as a player to
your camcorder.
When an i.LINK cable is connected, the
format of the input signal (
or ) will be
indicated on the LCD screen of your
camcorder (This indicator may appear
on the screen of the playback device but
it will not be recorded).
4 Insert a cassette into the VCR.
5 Set your camcorder to recording
pause.
While pressing X (PAUSE), press both
z REC (record) buttons
simultaneously.
6 Start playing the cassette on your
VCR.
The picture played on the VCR appears
on the LCD screen of your camcorder.
7 Press X (PAUSE) again at the
point you want to start recording.
8 Press x (STOP) to stop
recording.
b Notes
You cannot record TV programs from the
HDV/DV interface (i.LINK).
User bits are not recorded when dubbing from a
DVCAM (DV) device via an i.LINK cable.
You can record pictures from DV devices only
in the DVCAM (DV) format.
Note the following when connecting with an
i.LINK cable:
The recorded picture becomes rough when a
picture is paused on your camcorder while
recording to a VCR.
You cannot record the picture and sound
separately.
If you pause or stop the recording and restart
it, the picture may not be recorded smoothly.
If video signals inputted to your camcorder via
the HDV/DV jack experience the
phenomenon of jittering (variation in
frequency), that jittering is transmitted to the
video signals outputted from the COMPONENT
OUT jack and A/V OUT jack. When you
monitor a movie on a TV connected to your
camcorder via the COMPONENT OUT jack or
A/V OUT jack, images may be distorted or not
be displayed. Jittering will not affect recording
of the movie on a tape with your camcorder but
may affect recording of the movie with another
VCR connected to your camcorder via the
COMPONENT OUT jack or A/V OUT jack.
z Tips
When a 4:3 video signal is input, it appears with
black bands on the right and left sides on the
screen of your camcorder.
Be sure to insert a “Memory Stick Duo” for
recording in your camcorder beforehand,
and assign [PHOTO] to any of ASSIGN
buttons (p. 43).
1 Perform steps 1 to 4 in
“Recording movies.”
Recording still images
Recording pictures from a VCR (Continued)