Filter
Top Products
106
Troubleshooting (Continued)
[COLOR SLOW SHTR] does not
operate correctly.
• [COLOR SLOW SHTR] may not operate
correctly in total darkness. Use NightShot
plus or [S. NIGHTSHOT PLS].
You cannot adjust [LCD BL LEVEL].
• You cannot adjust [LCD BL LEVEL] when:
– The LCD panel is closed on your
camcorder with the LCD screen facing out.
– The power is supplied from the AC
Adaptor.
You cannot find the images to be
played back.
• Select the media to be played back by
touching (HOME) t (MANAGE
MEDIA) t [MOVIE MEDIA SET] or
[PHOTO MEDIA SET] (p. 28).
You cannot play back a disc.
• Check out the disc compatibility (p. 13).
• Insert a disc with the recording side facing
your camcorder (p. 30).
• The disc that was recorded, formatted, or
finalized on other devices may not be played
back on your camcorder.
• The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The playback image is distorted.
• Clean the disc using a soft cloth (p. 118).
Images stored on a “Memory Stick
PRO Duo” cannot be played back.
• Images cannot be played back if you have
modified files or folders, or have edited the
data on a computer. (The file name flashes
when viewing the still image.) This is not a
malfunction (p. 119).
• Images recorded on other devices may
neither be played back, nor displayed in
actual size. This is not a malfunction
(p. 119).
“ ” is indicated on an image in the
VISUAL INDEX screen.
• Loading of the data may have failed. It may
be indicated correctly when you turn off the
power and then turn it on again, or repeat
removing and inserting the “Memory Stick
PRO Duo” a couple of times.
• You removed the battery pack or the AC
Adaptor while the access lamp is flashing.
This operation may damage the image data,
which will be marked with .
• This may appear on still images recorded on
other devices, edited on a computer, etc.
“ ” is indicated on an image in the
VISUAL INDEX screen.
• Perform [REPAIR IMG.DB F.] (p. 76). If it
still appears, delete the image marked with
(p. 51).
No sound or only a quiet sound is
heard during playback.
• Turn up the volume (p. 45).
• Sound is not output when the LCD screen is
closed. Open the LCD screen.
• When you record sound with [MICREF
LEVEL] set to [LOW] (p. 96), the recorded
sound may be difficult to hear.
You cannot play back the disc, or the
disc is not recognized.
• Clean the disc using a soft cloth (p. 118).
• Finalize the disc (p. 67).
• A disc recorded in VR mode cannot be
played back on a device that does not support
VR mode. Check the compatibility in the
instruction manual of the playback device.
Playing back images on your
camcorder
Playing back a disc on other
devices