Filter
Top Products
24
Step 2: Charging the battery pack (Continued)
When playing a disc
DCR-DVD610
DCR-DVD710/DVD810
* When the LCD backlight is on.
b Notes
• See page 28 for selecting the media.
On the battery pack
• Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/ (Still) lamp (p. 25)/
ACCESS lamp (p. 30)/access lamp (p. 32).
• The CHG (charge) lamp flashes during
charging, or Battery Info (p. 22) will not be
correctly displayed under the following
conditions:
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out (for Battery Info
only).
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord (mains lead) is disconnected from
the wall outlet (wall socket).
• When attaching an optional video light, it is
recommended that you use an NP-FH70/NP-
FH100 battery pack (DCR-DVD710/DVD810).
• We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
On the charging/recording/playback time
• Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
• The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
• The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
On the AC Adaptor
• Use the nearby wall outlet (wall socket) when
using the AC Adaptor. Disconnect the AC
Adaptor from the wall outlet (wall socket)
immediately if any malfunction occurs while
using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
• Even if your camcorder is turned off, AC power
source (mains) is still supplied to it while
connected to the wall outlet (wall socket) via the
AC Adaptor.
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH40
(supplied)
120 135
NP-FH50 140 155
NP-FH70 300 330
NP-FH100 680 745
Battery pack
LCD panel
opened*
LCD panel
closed
NP-FH40
(supplied)
115 135
NP-FH50 135 155
NP-FH70 290 330
NP-FH100 650 745