Filter
Top Products
GB
22 Assigning the IP Address to this Unit
To specify the IP address
manually:
Select Use the following IP address,
and type the IP address, Subnet mask
and Default gateway in each box.
8 Set the primary DNS Server
address and, if necessary,
secondary DNS server address.
To obtain the DNS server
addresses automatically:
Select Obtain DNS server address
automatically.
To specify the DNS server
addresses manually:
Select Use the following DNS server
address, and type the Primary DNS
server address and Secondary DNS
address in each box.
The Third DNS server address and
Fourth DNS server address are invalid
for this unit.
9 Set the HTTP port number.
Normally select 80 for the HTTP port
No. To use another port number, select
the text box and type a port number
between 1024 and 65535.
10Type the Administrator name
and Administrator password.
The default settings of both items are
“admin.”
You cannot change the Administrator
name and Administrator password in this
step. To change these items, see “Setting
the User – User setting Page” of the User’s
Guide stored in the supplied CD-ROM.
11Confirm that all items are
correctly set, then click OK.
If “Setting OK” is displayed, the IP
address is correctly assigned.
12To access the camera directly,
double-click the camera name
on the list.
Note
Note