Filter
Top Products
31
GB
Preparations
continued on next page
To Remove the Card
1 Open the card cover.
2 Push the card eject button.
3 Pull out the card.
Initializing a Card
Uninitialized PC cards cannot be used in the camera. Before use, cards must first be initialized using
the camera.
Caution
If you initialize a card that has data recorded on it, all recorded data, including
protected picture data, will be erased.
•
CAM
•
PLAY
•
OFF
MENU
EXCUTE
EXIT
•
PC
1 While pressing the mode lock (green), turn the
power/mode dial to CAM mode.
Note
Initializing PC cards is explained here with the
power source/mode dial set to CAM mode, but the
same operation can be performed in PLAY mode.
2 Press the MENU button.
The LCD monitor turns on and the menu is
displayed.
1
2
3
3
4
1
2