109
Troubleshooting
Troubleshooting
This subject is not visible on the screen.
• Your camera is set to the playback mode. Press to change to the recording mode
(page 35).
Anti-blur function does not work.
• The anti-blur function does not work when appears on the display.
• The anti-blur function may not work properly when shooting night scenes.
• Shoot after pressing the shutter button halfway down; do not press it fully down suddenly.
Recording takes a long time.
• The NR slow shutter function is activated (page 19). This is not a malfunction.
The image is out of focus.
• The subject is too close. Shoot in (Macro On) recording mode. Make sure to position the
lens farther away from the subject than the shortest shooting distance, approximately 8 cm
(3 1/4 inches) (W)/80 cm (31 1/2 inches) (T) (DSC-T200), 8 cm (3 1/4inches) (W)/25 cm
(9 7/8 inches) (T) (DSC-T70/T75), when shooting (page 30). Or set to (Close focus
enabled) mode and shoot about 1 to 20 cm (13/32 to 7 7/8 inches) from the W side distance
(page 30).
• (Twilight) mode or (Landscape) mode or (Fireworks) mode is selected in the Scene
Selection when shooting still images.
• The Focus preset function is selected. Select the auto focus mode (page 31).
• Refer to “How to use the [Spot AF]” on page 32.
Zoom does not work.
• Optical zoom cannot be used in (Close focus enabled) mode.
• You cannot use the Smart zoom when:
– the image size is set to [8M], [3:2].
• When the Face Detect function is activated, you cannot use the Digital Zoom.
The flash does not work.
• The flash is set to (Flash Off) (page 29).
• You cannot use the flash when:
– [REC Mode] is set to [Burst] or Exposure Bracket (page 47).
– (High Sensitivity) mode or (Twilight) mode or (Fireworks) mode is selected in the
Scene Selection (page 45).
– Shooting in (Close focus enabled) mode.
– Shooting movies.
• Set the flash to (Flash On) when (Landscape) mode, (Beach) mode, or (Snow)
mode is selected in the Scene Selection (page 29).